特性 Features:
1. 薄板用高精度、高速度、特殊結構材料整平機。
2. 本機是強而有力的新設備，用於高速沖壓工作，可提升沖床產品的質量。
3. 卷料未經矯平消除應力是無法生產出良好之沖件，唯有將卷料矯平，消除應力才能達成。
4. 經過本機矯平后，可將材料修正成向下向上彎曲或平坦。
5. 傳動裝置由變頻器（循環控制）可與沖床速度同步，平衡的送料。
6. 兩段式矯平過程中（頭端＜-＞尾端）中途不須再作矯平之調整，可確保一致相同之平坦度。

1. High precision, high speed, special structure of straightener for thin material.
2. Thins powerful new equipment is for high speed press work and will help to improve precision pressing quality and quantity.
3. Fine electric parts can not be finished with high accuracy unless straightened coil materials may achieve. So thin material need to be
    straightened, and the stress be moderately removed.
4. After being straightened, materials can be curled upward or downward or flat easily.
5. As bearings of work-rolls are, of a oiling, lubricating free type, there will be no trouble from the adherence of oil or dirt. The drive unit
    is controlled by an inverters (cycle control) to feed smoothly at a speed synchronized with press.
6. Two sections type straightening device, it is no need to is no need to adjust straighten function when rolled material is under straightening process (from start to end). To ensure the material at same flatness completely.

規格表見圖片