最适合多种多量之生产
designed for various and mass production
新型的特点 Character of new gripper feeder:
1. 适用于要求高速加工，且需要高精度送料的冲制品。
（每分钟送料最高可达1200次）
2. 机械运转时，安静无声，不造成工作场所的噪音。
3. 材料表面不会留下任何压痕，可使冲制电镀材料铝合金、不锈钢、铜、铁、或二次工程厂商、
     得到最完美的冲制成品。
4. 所有调整均采用刻画式，操作简单，稳定性佳任何人员均可轻易操作它本体为一体成形，可避
    免冲压时所产生的共振，而影响送料精度。

Suitable for high speed stamping and preecise feeding press work.(Max.1200 times/min)
It is silent when the machine is working; no noise will be caused in the workplace.
No press mark left on the material surface, enable plating material aluminum alloy, stainless
steel, copper, ironand wecondary machining factories have their perfect stamping parts.
All adjustments adopt portrayal.so the operation is easy and the stability is excellent, any
people may operate it easily. the body is shaped integrally, which can avoid the resonance
caused while pressing.

新型的标准规格(或设计)说明 Standard specification (or design):
1. 板厚调整只需依材料厚度旋转刻画即可。
2. 放松装置调整只需依模具内导梢位置来旋转刻画即可。
3. 送料长度用曲轴偏心量来调整（用块规方式亦可）。
4. 上面压板为气压式（压力可调整）。
5. 插入材料时，上下压板由气压-空气阀手动开关来操作开闭。
    润滑系统采用自动循环给油系统，对于传动齿轮，固定座传动装置，其他轴承部分均为强制性
    循环浸油，减少各部件之磨损延长其寿命且可长时间处于高温状态下工作。

Panel thickness adjustment can be done only by turning the graduation according to the
thickness of material. release device can be adjusted only by turning the graduation according
to the inner guide pin position of mould. feed length is adjusted with the eccentric value of
crank shaft (also by block gauge) when material inserted, upper and lower clamping plates
are controlled by manual switch operating with pneumatic valve.The lubricationsystem adopts
automatic circulation oil system, and the transfer gear, fixed seat transfer device and other
bearing parts adopt forced circulation oil immersion, which decreases the abrasion between
different parts and peolings its service life. Besides, the machine may work under high
temperature for a long time.

规格表见图片